监控

目前，frps 服务端支持两种监控系统：内存监控和 Prometheus 监控。

内存监控

内存中存储的监控数据主要用于 Dashboard 展示。当在 frps 配置中开启 Dashboard 功能后，内存监控默认启用。

请注意，内存中的监控数据在每次重启进程后会被清空，或者保留 7 天。监控数据可以通过 Dashboard 的地址发送 HTTP 请求获取，但目前此 API 尚不规范，不建议直接使用。

Prometheus 监控

由于设计问题，Prometheus 对外提供的查询接口与 Dashboard 的地址重用，因此要使用 Prometheus 监控，必须首先启用 Dashboard。

在 frps.ini 中启用 Dashboard 并设置 enablePrometheus = true，然后你可以通过访问 http://{dashboard_addr}/metrics 来获取 Prometheus 的监控数据。

最后修改 November 15, 2023: fix 404 (#71) (626ce4d)

Monitor and control

Currently, the frps Server side supports two types of monitors and Control system: Memory Monitor and Control and Prometheus Monitor and Control.

Memory Monitor and Control

The Monitor and control data stored in memory is mainly used for the dashboard Display. When opening the Dashboard in frps Configuration After the function, Memory Monitor and Control are enabled by default.

Please note that the Monitor and The control data will be cleared or retained for 7 days after each process restart. Monitor And control data can be sent via HTTP via the address on the dashboard Request to obtain, but currently this API is not standardized and it is not recommended to use it directly.

Prometheus Monitor and Control

Due to design issues, the query interface provided by Prometheus to the public is not compatible with the Dashboard Reuse addresses, therefore use Prometheus Monitor and Control, Dashboard must be enabled first.

Enable Dashboard in frps.ini and set it up enablePrometheus=true, then you can access it by accessing http://{dashboard_addr}/metricsto obtain Prometheus Monitor and control data for.

Last modified November 15, 2023: fix 404 (#71) (626ce4d)